•
•
•
•
•
•
•
•
• |
Catalogues |
» STOCKS » Auto Parts » Automotive » Automotive Hose » Gates |
Automotive Hose - Gates
| RADIATOR HOSE: |
APPLICATION:
Factory moulded to fit specific applications.
Similar to OEM specifications.
• Recommended for upper, lower and other
coolant applications.
• Heat and ozone resistant cover.
• Engineered to resist electrochemical degradation the leading cause of hose
failure. |
|
• Meets SAE 20R4 and 20R3
type EC Class
D-1 and D-2 specifications.
TEMPERATURE RATING:
400C to 1350C in coolant hose applications.
CAUTION:
Do not use for fuel or oil transfer applications. |
|
 |
| SMALL BORE MOULDED COOLANT HOSE: |
APPLICATION:
Specially designed, OEM style factory
moulded hose to fit today’s smaller, tighter-fitting
engine compartments. Can be used for
coolant, water and air applications.
• Similar to OEM specifications
• Engineered to resist electrochemical
degradation the leading cause of hose
failure |
|
• Inside diameters range from 1/4” (6mm) to
1” (25mm)
• Meets SAE 20R3 Type EC Class D-1 and
D-2 specifications
TEMPERATURE RATING:
400C to 1350C in coolant hose applications.
CAUTION:
Do not use for fuel or oil transfer applications. |
|
 |
| COOLING SYSTEM HOSE PACK: |
APPLICATION:
Application pack containing upper and lower
radiator hose along with heater and bypass
hose. Provides a convenient method of replacing
all cooling system hoses at the same time.
Also includes free Stant Thermostat.
• Save on coolant during cooling system
maintenance by replacing all hoses at once |
|
• Once one hose fails on a vehicle there is a
high possibility that all other hoses will also
fail |
|
 |
| SMALL BORE MOULDED COOLANT HOSE: |
APPLICATION:
Gates mulifi t hose consists of two bends, a 45
and 90 degree. This enables the hose to be
used in some applications as a replacement to
small bore hoses. The new range consists of
7 new part numbers ranging from 6mm ID to
25mm ID hose. |
|
| PART No |
SIZE (In mm) |
| 01-0001 |
6 |
| 01-0002 |
8 |
| 01-0003 |
10 |
| 01-0004 |
12 |
| 01-0005 |
15 |
| 01-0006 |
19 |
| 01-0007 |
25 |
|
|
 |
| GATES RACING RADIATOR HOSE: |
APPLICATION:
Gates Racing radiator hose range has been
designed for performance applications. The
hose features an aramid reinforced
construction for increased strength and
pressure resistance. High temperature EPDM
rubber provides superior durability and
protection against extreme temperatures. The
hose also features a distinctive blue cover to
give your car a showroom appearance.
The racing radiator hose packs consist of
both the upper and lower hose. Gates have |
|
released in total twenty packs covering vehicle
applications including Mitsubishi Lancer, Ford,
Nissan Silvia, Nissan Skyline, Hyundai Exel,
Subaru and Holden. |
|
 |
| GATES RACING BRAIDED RADIATOR HOSE: |
APPLICATION:
High Performance fl exible braided radiator
hose to give the “racing look”. Straight lengths
of radiator hose covered with Stainless Steel
Outer Braid. Blue Anodised Aluminium End Caps
supplied complete with hose clamps in order to
retrofi t most upper & lower hoses. Comes in both
32mm & 38mm I.D. with three lengths per size. |
|
| PART# |
LD (mm) |
Length (mm) |
| 08-0001R |
32 |
330 |
| 08-0002R |
32 |
432 |
| 08-0003R |
32 |
584 |
| 08-0004R |
38 |
394 |
| 08-0005R |
38 |
568 |
| 08-0006R |
38 |
635 |
|
|
 |
| VULCO-FLEX II COOLANT HOSE: (Formerly FLEX-N-FIT) RED STRIPE |
APPLICATION:
Redesigned Gates Vulco-Flex II will bend in
almost any direction. It easily replicates the
angles and planes of a wide variety of expensive
original equipment hoses, for quick, easy,
error-proof replacement.
• Improved sealing surface for greater leak
resistance
• Increased fl exibility for easier installation |
|
• Internal wire spring resists hose collapse
• Heat and ozone resistant cover
• Better appearance
• Rated for SAE 20R5 Class D-2 performance
• High temperature rating up to + 1250C
GATES RECOMMENDS REPLACING CLAMPS EACH
TIME A NEW COOLANT HOSE IS INSTALLED.
DO NOT USE FOR FUEL OR OIL TRANSFER
APPLICATIONS. |
|
 |
Tables below list size range by hose internal diameter:
|
|
|
|
1-1/2” (33) |
 |
| PART No |
LENGTH (In mm) |
| 25473 |
265 |
| 25474 |
305 |
| 25476 |
356 |
| 25477 |
394 |
| 25478 |
432 |
| 25480 |
508 |
| 25482 |
559 |
| 25484 |
635 |
| 25487 |
762 |
| 25490 |
889 |
| 25499 |
1219 |
|
|
1-1/2” (38) - 1-3/4” (44) |
|
| PART No |
LENGTH (In mm) |
| 25526 |
335 |
| 25527 |
381 |
| 25528 |
419 |
| 25530 |
508 |
| 25532 |
559 |
| 25535 |
686 |
|
|
|
|
|
| HOSE I.D. REDUCERS: |
APPLICATION: Slips inside current Gates hose to reduce inside diameters. Gives maximum coverage with minimum hose inventory. Makes it possible to adjust inside diameters of a large hose for emergency replacement.
• Quality rubber construction assures maximum dependability, no leakage |
|
• Fits wide range of Gates cooling System hoses RECOMMEND FOR COOLANT & AIR APPLICATIONS.
| PART# |
(Inches) |
|
PART# |
(Inches) |
| 26390 |
1-1/2
to 1-1/4 |
|
26393 |
2-1/4 to 2 |
| 26391 |
1-3/4
to 1-1/2 |
|
26394 |
2-1/2 to 2-1/4 |
| 26392 |
2 to 1-3/4 |
|
26395 |
3 to 2-1/2 |
|
|
 |
| FUEL LINE / VACUUM TUBING & HEATER HOSE CONNECTOR KIT: |
FUEL LINE:
Handy assorted case that holds 36 connectors
suitable for fuel & vacuum line applications.
Assortment includes two of each connected
shape “Y”, elbow, tee, reducer and straight.
Sizes range from 2.38mm to 4.76mm OD. |
|
HEATER HOSE:
Sturdy assortment case that opens from either
side and contains 36 connectors from 6mm to
19mm ID hose, two of each connector shape
elbow, straight & reducer tee.
|
|
 |
| HEATER HOSE & FUEL LINE CONNECTORS: |
APPLICATION:
Unique single barb design provides greater seal ability or dual inside
diameter hoses.
• Using straight, elbow and tee shapes almost any hose configuration
can be constructed
• Glass reinforced nylon resists chemicals and temperatures up to
+2500C
• Bulkheads assure proper insertion depths
• Anti-rotation device prevents hose twisting
• 5 per bag |
|
|
|
| PART# |
END (1) O.D. |
90° TEE O.D. |
END (2) O.D. |
| (Inches) |
(mm) |
(Inches) |
(mm) |
(Inches) |
(mm) |
| 28636 |
5/8 |
15.9 |
3/8 |
9.5 |
5/8 |
15.9 |
| 28637 |
3/4 |
19.0 |
3/8 |
9.5 |
3/4 |
19.0 |
|
|
|
|
| PART# |
OD(inch) |
OD(mm) |
| 28601 |
1/4 |
6.3 |
| 28600 |
5/16 |
8.0 |
| 28602 |
3/8 |
9.5 |
| 28603 |
1/2 |
12.7 |
| 28604 |
5/8 |
15.9 |
| 28605 |
3/4 |
19.0 |
| 28606 |
1 |
25.4 |
|
|
|
|
|
| PART# |
OD(inch) |
OD(mm) |
| 28621 |
1/4 |
6.3 |
| 28622 |
3/8 |
9.5 |
| 28623 |
1/2 |
12.7 |
| 28624 |
5/8 |
15.9 |
| 28625 |
3/4 |
19.0 |
| 28626 |
1 |
25.4 |
|
|
|
|
|
| PART# |
OD(inch) |
OD(mm) |
| 28632 |
1/4 |
6.3 |
| 28632 |
3/8 |
9.5 |
| 28633 |
1/2 |
12.7 |
| 28634 |
5/8 |
15.9 |
| 28635 |
3/4 |
19.0 |
| 28636 |
1 |
25.4 |
|
|
|
|
|
| PART# |
OD(inch) |
OD(mm) |
| 28609 |
3/8 - 1/2 |
9.5 - 12.5 |
| 28610 |
1/2 - 5/8 |
12.7 - 15.9 |
| 28612 |
1 - 3/4 |
19.0 - 25.4 |
|
|
|
| 90° MOULDED HEATER HOSE: |
| PART# |
I.D. (mm) |
Inches |
mm |
| 02-0356 |
1” (25) |
5 x 5 |
125 x 125 |
| 05-1101 |
1 & 1/4” (32) |
6 x6 |
150 x 150 |
| 05-1102 |
1 & 1/2” (38) |
6 x 6 |
150 x 150 |
| 05-1103 |
1 & 3/4” (44) |
7 x 7 |
175 x 175 |
| 05-1104 |
2” (50) |
7 x 7 |
175 x 175 |
| 05-1105 |
2 & 1/4” (57) |
8 x 8 |
200 x 200 |
|
|
APPLICATION:
Especially designed for diffi cult heater hose
applications requiring sharp 900 bends. Eliminates
the need for extensive inventory. Just 22
sizes handle thousands of applications.
• Engineered to resist electrochemical
degradation the leading cause of hose failure
• Resists water permeation
• Similar to heater SAE 20R4 type EC
Class D-2
|
|
• Use with heater hose connectors and bulk
heater hose for virtually a complete moulded
heater hose coverage
• Temperature rating: -400C to + 1350C
|
| UNI COIL: |
APPLICATION:
• Holds hose in place
• Quality marine grade
stainless steel
• Versatile & easy to use
• Durable and long lasting |
|
| PART# |
Size |
| 28514 |
1/4" |
| 28515 |
5/16" |
| 28516 |
3/8" |
| 28510 |
1/2" |
| 28511 |
5/8" |
| 28512 |
3/4" |
| 28517 |
1" |
|
|
 |
|