AUTO EQUIPMENT

Model No SPOA10S5G6BWG

• CLEAR FLOOR - 4.5 Tonne Lift Capacity
• Electro-Hydraulic
• FULL 2 YEAR WARRANTY
• Made to American Lift Institute Standards.
• Genuine 10,000 lbs (4,536 Kg) Lift capacity for cars, vans, 4WDs & light trucks.
• Fast Lifting – only 30 Seconds. 4 kW Motor
• Very Safe & Extremely Reliable.
• 3 Phase Power Supply.
• Grey in colour
• Overall Height 3.8 Metres.
• Maximum lifting height approx 1.9 Metres
• Minimum Height only 93mm - great for lowered vehicles
• 2.727 Metres between columns - great for wide vehicles
• 3.493 Metres Width Overall (outside of base plate)
• 3 Stage Asymmetrical Front Arms

Model No  SM40-47

• 4 POST ELECTRIC HYDRAULIC HOIST
• 4000 kg Lifting Capacity
• Powder Coated Red Finish
• Lifting Time 45 Sec. Approx
• 3kW Motor, 3 Phase Power
• 2950mm Between Posts,
• (Suitable for Hunter Digital Imaging
  Wheel Alignment Systems)
• Optional 2.0 Ton, Air/Hydraulic Jacking Beam
• Optional Wheel Alignment Kit Available

Model No  SM40-47LT

• 4 POST ELECTRIC HYDRAULIC HOIST
• Built in Belly Lifter ( LT + Lift Table)
• 4000 kg Lifting Capacity
• Powder Coated Red Finish
• Lifting Time 45 Sec. Approx
• 3kW Motor, 3 Phase Power
• 2950mm Between Posts,
• (Suitable for Hunter Digital Imaging Wheel Alignment Systems)
• Optional Wheel Alignment Kit Available

Model No VLXS10 – Low Height Belly Lift

• Low Height Belly Lift
• 10,000 lb (4563 Kg Lift Capacity)
• 2300mm Overall Length / 1300mm Platform Length
• 1994mm Overall Width
• Collapsed Height 102mm (4 inches)
• 40 seconds Lifting Time to Full Rise
• Single Phase – 230 Volt
• Drive-over ramps and side rails provide the width
  to support wide vehicles
• Dual lifting cylinders provide plenty of power to
  vehicles to capacity
• Includes 4 heat resistant no-slip pads which provide
  a great contact for adaptors or vehicle pick–up points
• Comes standard with a 3 position wheel spotting dish
  for accurate spotting of vehicles

Model No RLP35 - Low Height Scissor Lift

• Low Profile Double Scissor Lifter
• Hydraulic synchronisation system with automatic levelling
• Above Floor Installation
• 3500kg Lift Capacity
• Rise: 1920mm
• 2100mm / 3500mm Overall Length
  (short / / long drive on ramps)
• 1500mm - 2000mm Platform Length
• 2050mm Overall Width
• Closed Height 127mm (5 inches)
• Three Phase Motor
• 40 seconds Lifting Time to Full Rise
• No mechanical connections between ramps

RFP14

The RFP14 Service Hoist features a 4500lb (2 Tonne) jacking beam. This model can be converted to a Wheel Alignment hoist - Model No RFP14A

• 4 POST ELECTRIC HYDRAULIC HOIST
• BIG 6.3 Tonne Lifting Capacity
• Powder Coated Blue Finish
• Lifting Time 65 Sec. Approx
• 3kW Motor, 3 Phase Power
• 2.9 Metres Between Posts,
• (Suitable for Hunter Digital Imaging
  Wheel Alignment Systems)
• Includes2.0 Ton, Air/Hydraulic Jacking Beam
  (Upgradeable to 3 Tonne)
• Optional Alignment Kit Available

RMR6 - Portable Low to Mid Rise Scissor Lift

• Portable, Easy to Move Lifter
• Two Hydraulic Cylinders
• Multiple Locking Positions
• Truck Adaptors Included
• Fast Operation - 20 to 30 seconds raise time
• 2721kg Lift Capacity
• Rise: 1372mm
• 2108mm Platform Length
• 1041mm Overall Width
• Minimum Height 127mm (5 inches)
• Shipping Weight 423 Kg (1000 lbs)

RXLDT- Motorcycle & ATV Lift

• Portable, Easy to Move Motorbike Lift
• Air Operated. No Power required
• Front wheel vice prevents wheel movement
  during securing, lifting and maintenance
• Foot pedal controlled power unit operates
  on 6.2-6.9 Bar / 90 -100 psi air
• Rear section (drop tail) is removable for
  complete rear wheel access
• Side extensions are standard for ATV
  and additional vehicle service
• 453kg (1000 lb) Lift Capacity
• Rise: 838mm (33 inches)
• Minimum Height 184mm (7-1/4 inches)
• Length with ramp 2870mm
• Length without ramp: 2362mm
• Width of platform: 2362mm
• Shipping Weight 312Kg (690 lbs)

• 4 point leveling system
• Automatic safety locks
• Adjustable runway
• Alignment operation (FPA4120F)
• Extra wide for 3D alignment system
• Flat deck design (FPL412)
• Hydraulic rolling jack (option)
• Maintenance free load bearing
• Open front design for easy under vehicle access (FPA4120F)
• Powder coat finish
• Strong hydraulic cylinder
• Single point lock release
• Turntable & slip plate alignment (FPA412)
• Overall Height 2.176 Metres
• 5.201 Metres Runway Platforms
  Maximum lifting height 1.826 Metres
  Overall Width 3.310 Metres including posts
  (2.910 Metres between columns)

DESCRIPTION:

FEATURES:

• Clear floor version with combi lifting pads

• Twin synchronised motors for quick efficient lifting

• Double safety nut on carriers and integral arm locks on all four arms

• Asymmetric lifting arms and a carriage design that allows for easy
vehicle entry/exit when on the lift

• CE approved

• 4 Tonne Lifting Capacity

• 22 Seconds Lifting Time – Very Fast

• 3 Metres between columns (posts)

• Wide Posts will not block targets seeing cameras on 3D Wheel Aligners

• 1.820 Metres Maximum Lifting Height

• 160mm Minimum Lifting Height

• 3kW Motor – 3 Phase Power Supply

• Min / Max Pressure: 5 / 10 bar

• 5.1 Metre Platform Length

• Provision for Front Turntables (for Wheel Alignment Caster Swing)

• 1020mm recesses with 3 Fillers

• Rear Slip Plates included (For Wheel Alignment rear adjustment)

• Comes with a 2 Tonne Jacking Beam (Danish Made)